Products

HDPE water supply pipes are extruded using PE100 high-density polyethylene as raw materials.

Features:
1. Non-toxic.
2. Smooth inner wall and low flow resistance.
3. No leakage. The strength of the HDPE pipe connection point is higher than the pipe itself.
4. Good flexibility. Convenient construction.
5. Good scratch resistance. The wear resistance is 4 times that of steel pipes.
6.PE pipes can be installed in a variety of trenchless methods, making it easy to construct and install.
7. Under the rated temperature and pressure design, it can have 50 years service life.
8. The pipeline is easy to transport and install, reducing the operation and maintenance cost.

POE (Polyolefin Elastomer, polyolefin elastomer) co-extrusion wear-resistant layer reinforced plastic composite pipe is a new type of pipe that combines the excellent elasticity and wear resistance of polyolefin elastomer with the structural strength and corrosion resistance of plastic composite pipe.

HDPE gas pipes are made of high-density polyethylene material, which has good corrosion resistance, aging resistance, wear resistance and high flexibility. These characteristics make HDPE pipes a high-quality choice in the field of gas transmission, especially in the construction of urban gas pipeline networks.

Ultra-high molecular weight polyethylene steel skeleton composite wear-resistant pipe is a composite pipe made of ultra-high molecular weight polyethylene (UHMWPE) inner pipe as the matrix , a network skeleton formed by continuous spiral winding of high-strength steel wire after adhesive resin coating as the reinforcement , high-density polyethylene as the protective layer, and the matrix , reinforcement and protective layer are closely connected with adhesive resin , and the composite pipe is formed by melting and composite.

Ultra-high molecular weight polyethylene ( UHMW-PE) is a linear structure po   lyethylene with an average viscosity molecular weight of more than 2 .5 million , and a very high relative molecular weight (the relative molecular weight of ordinary polyethylene is only 2-300 ,000) , giving it extraordinary performance and  becoming a new type of thermoplastic engineering plastic with moderate price  and excellent performance . It concentrates almost all the advantages of vario   us plastics: impact resistance , low temperature resistance , wear resistance , impact resistance , chemical resistance , self-lubrication , etc.

Steel-lined ultra-high molecular weight polyethylene ( UHMW-PE) composite pipe is made of ultra-high molecular weight polyethylene pipe and carbon steel pipe through scientific technology. It is characterized by a steel pipe with flange as the outer layer of the reinforcing sheath , and UHMW-PE as the inner layer of the base pipe , combining the characteristics of the two into one.

POE ( Polyolefin Elastomer, polyolefin elastomer) co-extrusion wear-resis-tant layer reinforced plastic composite pipe is a new type of pipe that combines the excellent elasticity and wear resistance of polyolefin elastomer with the st-  ructural strength and corrosion resistance of plastic composite pipe .

Steel Wire Reinforced Polyethylene Composite Pipe , also known as coiled pipe or reinforced polyethylene pipe , is a composite pipe that combines the excellent corrosion resistance and wear resistance of polyethylene ( PE) material with the high strength characteristics of steel wire . This kind of pipe is  wound on the polyethylene inner or outer pipe through a specific process , and   is tightly combined by hot melt or glue to form a high-performance pipe system . Suitable for high-pressure , long-distance conveying systems .

Steel wire wound skeleton reinforced polyethylene plastic composite pipe (often referred to as steel skeleton polyethylene composite pipe or SRPE  pipe) is a new type of pipe material that combines the advantages of metal skeleton and polyethylene plastic . This composite pipe uses a specific process to wrap high-strength steel wire as a skeleton inside or outside the polyethylene ( PE) pipe , which sign ificantly improves the pressure bearing  capacity, impact resistance and stability of the pipe.

The steel skeleton polyethylene plastic composite pipe is a new type of double-sided anti-corrosion pressure pipe that is continuously formed on the extrusion production line with high-quality low-carbon steel wire as the reinforcing phase and pipeline-grade polyethylene as the matrix. The anti-wear performance is 4 times that of steel pipes.

Porous steel belt polyethylene composite pipe (commonly referred to as porous steel belt pipe or PSP pipe) is a kind of composite pipeline material which combines the strength of steel pipe with the advantages of corrosion resistance , wear resistance and  easy installation of polyethylene ( PE) plastic pipe . This kind of pipeline adopts a special process to weld cold-rolled steel strip into a mesh structure , which is used as the skeleton and then made of thermoplastic (such as PE) inside and outside.

Vinyl chloride (PVC-C) pipe is a special type of polyvinyl chloride pipe,and its full name usually refers to chlorinated polyvinyl chloride (Chlorinated Polyvinyl chloride) pipe. This pipe material is chlorinated on the basis of ordinary PVC to improve it sheat resistance, chemical resistance,mechanical strength and aging resistance.