Electric Fusion Pipe Fittings Series

An electrofusion 45° elbow is a type of pipe fitting that is used to change the direction of a pipe at an angle of 45°. In piping systems, it is mainly used to connect two pipes at a 45° angle, so that the pipes can be laid according to a specific layout. This kind of pipe fittings are widely used in water supply and drainage systems, gas transmission systems, chemical pipeline systems and many other fields.

Electrofusion 90° elbows are mainly used to change the direction of the pipe, enabling the pipe to be turned at a 90° angle. The connection method is through electrofusion welding, using the heating wire embedded in the inner surface of the pipe fitting, which generates heat after being energized, melts the connection interface between the pipe fitting and the pipe, and then cools and solidifies it, so as to form a tight, high-strength connection. It has the characteristics of good sealing and easy installation.

An electric flange is a type of pipe fitting used for pipe connections. It is mainly composed of a flange plate and an electrofusion connection part. The flange is generally round and has bolt holes on it for bolting to adjacent flanges. The electrofusion connection part is on the inner diameter side of the flange, there is an embedded heating wire, which is used to connect with the pipe by electrofusion welding.

An electrofusion cap is a type of pipe fitting that is used to close the end of a pipe. By electrofusion welding, the pipe cap and pipe end can be tightly bonded together to form a complete sealing structure. This sealing effect can effectively prevent the leakage of media for a long time and ensure the safety of the piping system.

The electrofusion reducing tee has three interfaces for connecting three pipes with different diameters together. It resembles a "T" shape, but the diameters of the three connectors can be different. It is mainly composed of the main body part and the electrofusion connection part. The main part is a tee profile structure, and its interior is hollow for the flow of fluids. The electric fusion connection part is embedded with electric heating wires inside each interface of the tee, and these heating wires are the key parts used for electric fusion connection with the pipe.

Electrofusion reducer is mainly used to connect two pipes with different diameters, so that the fluid can flow smoothly between two pipes with different diameters. It is generally shaped as a tubular structure with open ends and different diameters at both ends, and its interior is hollow to provide a channel for the fluid. In the piping system, when it is necessary to connect a thicker main pipe with a thinner branch pipe, or at the position of the pipe reducer, the electrofusion reducer can play a good connection role.

Electrofusion tee is a kind of pipe fitting that is widely used in piping systems. It has three connectors that resemble a "T" shape and have the same pipe diameter for all three connectors. It is composed of the main part and the electrofusion connection part. The main part is a tee shape structure with a hollow interior, which is used for the flow of fluid in three directions. The electric fusion connection part is embedded with electric heating wires inside each interface of the tee, and these heating wires are used for electric fusion connection with the pipeline.

Electrofusion pass-through is a type of pipe fitting used for pipe connection. The two ends are open, mainly used to connect two pipes of the same diameter, so that the pipe can continue in a straight direction. The inside is hollow to ensure the smooth passage of fluids or other media. The key part of the electrofusion pass-through is the electrofusion connection area, where the heating wire is pre-embedded around the inner wall of the pipe fitting, which is the key to achieving a strong connection with the pipe.